Smart FTTX Optic Power Meter S305

Self Calibration. FC, SC, and ST interfaces. Lower power consumption design, long standby time.

Ultra-wide measurement range. Accurate and durable handheld meter designed for the installation, operation and maintenance of optical fibre network.

It suitable for splice fiber cladding diameter from 125μm~400μm with low splice loss. New model with innovative technologies to reach the special splicing needs of factory, manufacturing, laboratory and R&D applications.

The Shenhuo Seiko SH-T301 is a state-of-the-art benchtop system designed specifically for the challenging task of removing Polyimide (PI) coatings from specialty optical fibers. Polyimide coatings are renowned for their thermal stability and chemical resistance, making them notoriously difficult to strip using conventional mechanical or chemical methods, which often result in glass damage or hazardous chemical exposure.

Product Introduction RADTECH® UV Curable Adhesive SH-D1370 is a single-component, highly transparent, low-refractive index UV curable adhesive. It cures rapidly under ultraviolet light of a specific wavelength. It is suitable for coating protection at fiber optic fusion splices to reduce coupling loss; suitable for fiber optic outer coatings to reduce light transmission loss; and suitable for the preparation of special functional film coatings. It features excellent moisture resistance, flexibility, and an ultra-low refractive index, making it suitable for surface coating on silicon-based substrates. Typical Applications: Used for fiber optic inner coatings; Used for coupling protection at fiber optic connectors; Special optical bonding; Preparation of special optical films and nanoimprinting;

Build in VFL and OPM function Indicate the signal direction and power in fiber Efficiently identifies the traffic direction and frequency tone

12-in-1 function 100km Range Multi-touch capacitive screen Support New gesture magnification function and screen capture

T0X series optical fiber recoater is the latest high-precision optical fiber recoater, including four types (HXGK-T01---HXGK-T04), suitable for various types of ordinary fiber, ribbon fiber and polarization maintaining fiber. Products are well-crafted with stable quality and easy to operate. They have a wide range of applications in scientific research, fiber optic sensing, fiber optic gyroscopes, optical switches, fiber optic lasers, fiber optic communications, etc. They are designed as multi-functional coating machines for fiber optic recoating repair. The coating length of this optical fiber recoater is 50 mm or 100 mm (customizable type), used to repair the outer coating layer of fusion-spliced optical fibers, to restore the physical and optical characteristics of the fibers, and to enhance the flexibility of the fibers to protect the bare fiber and fusion point.