Dust-Proof Fiber Optic Cleaning Kit FTTH Tool Kit S10

Standard size, light weight and reasonable structure. Easy for management and operation.

1. lt is used to recoat the spliced fiber or bare fiber and fiber repair, to protect the splicing area and recover fiber elasticity. 2. The high-refractive glue is cured in 1s and the low-refractive glue is cured in 7s 3. It is suitable for the coating needs of various single-mode, multimode, various polarization maintaining fibers, and various special structure optical fibers (including: elliptical, polarized, multi-core).

Suitable for 250um/900um/3.0mm fiber stripping Super accurate hardened stripping jaws Ensure smooth clean stripping action

High Speed Splicing and Heating Touch Screen and Keypad control Applicable to cladding diameter 200-250μm fiber

Large operating temperature range. The diameter of the cable and the bending radius are small, and the colleague-compatible optical signal transmission and power transmission can be freely installed in a small space.

It suitable for splice fiber cladding diameter from 125μm~400μm with low splice loss. New model with innovative technologies to reach the special splicing needs of factory, manufacturing, laboratory and R&D applications.

The main function of  this productis to remove the coating layer of optical fiber. The removal speed is fast and efficient, and the coating layer is not damaged after removal.

The Shenhuo Seiko SH-T301 is a state-of-the-art benchtop system designed specifically for the challenging task of removing Polyimide (PI) coatings from specialty optical fibers. Polyimide coatings are renowned for their thermal stability and chemical resistance, making them notoriously difficult to strip using conventional mechanical or chemical methods, which often result in glass damage or hazardous chemical exposure.