English
русский
español
português
All in one power meter and VFL function. Most compact in Size, ideal for field operation. With wavelength memory function, boot will display the last shutdown wavelength set.
Support simultaneous display of mW/dBm
Support automatic shutdown/backlight switchItem NO.:
S406Payment:
T/T, Paypal, Western Union, Moneygram, etc.Product Origin:
ChinaColor:
StandardShipping Port:
Nanjing/Shanghai/Guangzhou/Shenzhen/etc.Lead Time：
in 3 Working DaysOverview
S406 series OPM and VFL all-in-one machine are controlled by single chip microprocessor with complete functions. it can be well protected by using embedded detector and laser. lt has 10 standard wavelengths, such as1270nm/1577nm.lt also has frequency identification, auto matic shutdown function, CW/1Hz/2Hz red light modes wavelength memory, user calibration, and RJ45 network cable sequence and tracking test function.
Application
S406 seriesis mainly used for continuous optical signal continuous modulation optical signal power measurement optical fiber link loss test and optical fiber line on-off test.lt is widely used in optical cable construction and mainte- nance,optical fiber communication, optical cable sensing, Optical CATV and other fields.
Feature
All in one power meter and VFL function. Most compact in Size, ideal for field operation. With wavelength memory function, boot will display the last shutdown wavelength set.
LED screen SC FC ST optic power meter with VFL function This tester allows to perform both optical power/loss measurements and Fiber faults tracing visually.
Product Features: 1、OLED display screen, visible under strong light 2、500mAh rechargeable lithium battery 3、Type C charging port 4、Users can calibrate and correct themselves 5、With 1000 data storage spaces 6、With upper computer software, data can be exported 7、User set memory (wavelength, unit memory) 8、Display both mW and dBm values simultaneously
T0X series optical fiber recoater is the latest high-precision optical fiber recoater, including four types (HXGK-T01---HXGK-T04), suitable for various types of ordinary fiber, ribbon fiber and polarization maintaining fiber. Products are well-crafted with stable quality and easy to operate. They have a wide range of applications in scientific research, fiber optic sensing, fiber optic gyroscopes, optical switches, fiber optic lasers, fiber optic communications, etc. They are designed as multi-functional coating machines for fiber optic recoating repair. The coating length of this optical fiber recoater is 50 mm or 100 mm (customizable type), used to repair the outer coating layer of fusion-spliced optical fibers, to restore the physical and optical characteristics of the fibers, and to enhance the flexibility of the fibers to protect the bare fiber and fusion point.
2M synchronous clock input/output. Suitable for high-end applications. PC can perform remote control for tester through Ethernet.
Check line device also comes with RJ45 and RJ11 line sequence check function. more advanced network cabling equipment.
1. lt is used to recoat the spliced fiber or bare fiber and fiber repair, to protect the splicing area and recover fiber elasticity. 2. The high-refractive glue is cured in 1s and the low-refractive glue is cured in 7s 3. It is suitable for the coating needs of various single-mode, multimode, various polarization maintaining fibers, and various special structure optical fibers (including: elliptical, polarized, multi-core).
Upgraded high accuracy fiber identifier S506 integrates VFL and LED lighting function,It is one of the necessary tools for fiber maintenance.Fiber identifier can detect any position of the single mode and multi mode fiber.
IPv6 network supported
sales@seikofire.com
