-
Big diameter fiber fusion splicer
Mar 28 , 2024
A big diameter fiber fusion splicer is a fiber optic machine used for joining or splicing large diameter optical fibers together. This kind of splicer supports various fiber diameters, such as 125μm, 150μm, 200μm, 360μm, and 400μm. a brief explanation of each diameter: 125μm: This is the most common diameter for single-mode and multimode fibers used in telecommunications networks and data transmis...
Read More
-
Factors to Consider While Choosing a Fusion Splicer
Jan 17 , 2024
Fusion splicer is an integral part of the fiber optic world, providing the means to connect two optical fibers end-to-end using heat. They are used to ensure that light passing through the fiber does not scatter or reflect back by the splice, thus ensuring minimal insertion loss. Choosing the right fusion splicers can be a difficult job, given the various factors that need to be taken into conside...
Read More
-
Four Basic Steps to Complete a Proper Fusion Splicing
Jul 15 , 2021
Step 1. Preparing the Fibers 1. Strip jacket and remove an adequate amount of jacket, usually 2-3 m, for splicing and dressing the buffer tubes and fibers in the splice closure. Leave the proper amount of strength members to attach the cable to the closure. Refer to the splice closure directions for lengths needed. Clean all water-blocking materials using appropriate cleaners. 2. Remove buffer tub...
Read More
-
ARC Checking and Maintenance of the Splicer
May 21 , 2021
Working with fiber optics takes a delicate hand and some patience. One of the most used pieces of equipment is a fusion splicer. A fusion splicer uses an electric arc to fuse two pieces of optical fiber (glass) together so that light can pass through with no scatter of light or light reflected back (backscatter) by the splice. Fusion splicing helps to reduce loss in your network. Typical loss thro...
Read More
-
Daily maintenance of fusion splicer
Apr 09 , 2021
In the fusion state, the optical fiber advancement stops and the machine does not perform fusion operation. The reason is that the V-groove is dirty and must be cleaned. After closing the windproof cover, the optical fiber will not push forward. Reason: 1. The bare optical fiber is placed too far from the electrode or beyond the electrode, please replay the optical fiber. 2. The objective lens has...
Read More
-
The simple failure analysis and elimination of fusion splicer
Dec 23 , 2020
1. During the splicing process, the fusion splicer displays "fiber not found or the end face of the fiber is untidy". This is mainly caused by the surface of the optical system being contaminated. The protective glass (located under the electrode) should be cleaned with absolute alcohol, and the lens on the fiber cover should be cleaned at the same time. Wait until the alcohol is dry before procee...
Read More
-
Precautions for Using Fusion Splicer in Winter
Dec 07 , 2020
For communication workers working outdoors, the working environment in winter is relatively harsh. Rain and snow, windy weather, and foggy weather all bring great challenges to welding. The staff is shivering in the cold outside. The fusion splicer is also prone to failure. Today, I will give you some tips for using the fusion splicer in harsh environments and the points that should be paid attent...
Read More
-
Optical fiber alignment of optical fiber splicing machine
Nov 20 , 2020
Using optical fiber fusion machine for optical fiber fusion is one of the mainstream methods of optical fiber field termination, so there are many kinds of optical fiber fusion machine in the market, which is dazzling. How to choose a cost-effective optical fiber fusion machine has become a headache for many skilled workers. We know that the alignment accuracy of the optical fiber fusion machine i...
Read More
-
Cleaning of fusion splicer's microscopes (objective lenses)
Oct 23 , 2020
The fusion splicer uses the image processing system to observe the optical fiber. If the microscopic lens becomes dirty, it will affect the normal optical fiber observation, resulting in poor welding effect. Therefore, the lenses of the two microscopes should be cleaned regularly to keep the microlenses clean and tidy. The specific process is as follows: (1) turn off the power supply of the f...
Read More
-
Do you know what is fiber optic splicing?
Sep 18 , 2020
Fiber optic cable fusion splicing is a meticulous work, especially in the end face preparation, fusion splicing, coiling and other links. Fiber fusion splicing is to connect two-core fibers through a specific equipment fiber fusion splicer. 1. Preparation before optical fiber fusion splicing First prepare fiber stripper, cutter, fusion splicer, heat-shrinkable tube, alcohol cotton and ...
Read More