-
Fusion Splicer Maintenance how to Clean its V-groove?
Jun 09 , 2020
Fusion splicer is a high precision equipment, it is very import to do the maintenance during daily work. V-groove is a V slot on the ceramic substrate of narrow width, easily to accumulate dust which will make the fiber move instability and cause a bad fusion, therefore, the V groove should be cleaned regularly. The following is the way of cleaning the V-groove
Read More
-
How To Use OTDR?
Aug 14 , 2020
HOW TO USE OTDR? What is the most important thing to our OTDR? It must be looking at the graph and analyzing the curve. Then you can determine the condition of the line according to the curve. The operation mode and key function of each machine are basically different. First of all, we have to understand the basic operation and the key functions. We need to understand the most basic aspects of the...
Read More
-
How To Use The Optical Power Meter?
Aug 20 , 2020
Optical power meter refers to an instrument used to measure absolute optical power or the relative loss of optical power through a section of optical fiber. Simply put, it is to measure the attenuation of the optical signal after fiber transmission. Simple instructions: 1. When measuring the absolute optical power with the optical power meter, just connect the light source and look at the value in...
Read More
-
Introduce of Optical Power Meters
Aug 31 , 2020
Introduce of Optical Power Meters An optical power meter (or laser powermeter) is an instrument for the measurement of the optical power (the delivered energy per unit time) in a light beam, for example a laser beam. Typically, it allows for power measurements only with a relatively low bandwidth, and will e.g. display only the average power when receiving a pulse&nbs...
Read More
-
The Basic knowledge of PON
Nov 11 , 2020
1.1 Basic principles of PON system PON (passive optical network) refers to an optical access network in which the ODN (optical distribution network) between OLT (optical line terminal) and ONU (optical network unit) all adopts passive equipment. PON is a point-to-multipoint (P2MP) optical access system, which can save fiber resources, ODN does not require power supply, user access is convenient, a...
Read More
-
What are the main functional differences between OTDR and optical power meters?
Jan 13 , 2021
Anyone who does optical cable construction will often come into contact with optical power meter and OTDR (optical time domain reflectometer). Multi-users do not understand why it is necessary to use an optical power meter to test the optical loss after testing the OTDR. Doesn't OTDR have the function of testing fiber loss? And there are some differences in the main functions of the two devices? O...
Read More
-
Four key factors in the purchase of Optical Power Meter
Jan 27 , 2021
There are many kinds of optical power meters, which one is suitable for us? in choosing optical power timing, we should also consider the following factors: (1) Application. Ordinary optical power meters can generally measure the absolute optical power of ordinary optical fiber links, but in some special applications, such as passive optical network (PON), coarse wavelength division multiplexing (...
Read More
-
What's PON? What's PON optical power meter?
Apr 14 , 2021
PON (Passive Optical Network) The system is mainly composed of OLT (Optical Line Terminal), ONU (Optical Network Unit) and ODN (Optical Distribution Network) in the optical distribution network. Among them, the ODN does not include active equipment, and the OLT to the ONU is connected through an optical splitter to form a P2MP (point-to-multipoint) optical access system. PON can save optical fiber...
Read More
-
The Most Import Thing You Need To Know About Fiber Optic Power Meters
Jul 30 , 2021
Optical Power Meters Here The fiber optic power meter is a special light meter that measures how much light is coming out of the end of the fiber optic cable. The power meter needs to be able to measure the light at the proper wavelength and over the appropriate power range. Most power meters used in datacom networks are designed to work at 850nm and 1300nn. Power levels are modest, in the range o...
Read More
-
What is OTDR Blind Area?
Aug 26 , 2021
Why does the blind area come up? The OTDR produces a blind area because the OTDR's detector is temporarily "blinded" by the high intensity Fresnel reflection light (mainly caused by the air gap between the OTDR connections). When the high intensity reflection is produced, the power of the photodiode is more than 4000 times higher than the backscatter power. Thus, the reflected light signal receive...
Read More
-
Working principle of Optical Fiber Fusion splicer.
Apr 12 , 2022
Optical fiber fusion splicer can be said to be an indispensable tool product in the field of communication engineering. for people who have had experience in communication engineering, they must know the operation of the fusion splicer like the back of their hand, but it is such a fiber fusion splicer. do you know how he works? Today we will introduce, if you understand, it may be helpful to the l...
Read More
-
The impact of ONU low light on optical networks and testing
Jul 04 , 2022
When we browse the web at home when the broadband network speed is not stable, watching video suddenly lag, the game is playing when the excitement suddenly disconnected and other phenomena occur, it is likely that the home optical cat ONU weak light! What is called optical cat ONU weak light?ONU is what we commonly known as optical cat equipment, used to convert optical signals on the optical fib...
Read More
-
Why can't see the reflector mirror on the fusion splicer now?
Aug 02 , 2022
With the continuous development of the optical fiber communication industry, the design of fusion splicers is also constantly improving. Among them, the structural changes of SeikoFire's splicing machine are very significant. It took the lead in carrying out some structural changes in the industry, such as: reflective mirrors. There are 2 traditional reflectors, which are installed in the windshie...
Read More
-
The introduction to OTDR begins with the cognitive curve
Aug 16 , 2022
OTDR is one of the most commonly used fiber optic measurement instruments and is widely used in the measurement, construction, maintenance and acceptance work of fiber optic cable projects. Although OTDR is widely used and is a common instrument for many installation and maintenance teams and engineering teams, but due to the OTDR curve expression is not intuitive enough, there are still many prac...
Read More
-
How To Cut Fibers With Large Cladding Diameters?
Sep 08 , 2022
In order to meet the needs of industry and scientific research that pursue high precision and need to cut large diameter optical fibers, Seikofire launched the SH-D106 large diameter optical fiber cleaver. It has a wide range of applications in fiber lasers, fiber sensor manufacturing, project research and development in universities and related R&D institutions, submarine optical cables, nati...
Read More
-
What is PON Power Meter
Aug 01 , 2023
PON (Passive Optical Network) Power Meter is a special instrument used to test the optical power of passive optical network (PON). PON is a kind of optical fiber communication technology, which is widely used in fiber-to-the-home (FTTH) network to provide users with high-speed broadband access. The main function of PON Power Meter is to measure the power of optical signals to ensure the transmissi...
Read More
IPv6 network supported
English
русский
español
português
sales@seikofire.com
